1" BRASS WIRE BRUSH - 3/32" SHANK

1" BRASS WIRE BRUSH - 3/32" SHANK

1" HARD BRISTLE BRUSH - 3/32" SHANK

1" HARD BRISTLE BRUSH - 3/32" SHANK

1/16" Shank Carving Drill

The flutes on this 1/16" carving drill are sharpened from the tip on up. That allows you to carve sideways with the tool. It's great for cleaning out or expanding tight areas. The tapered design draws the drill into the wood very quickly. The drill...

1/8" Shank Carving Drill

The flutes on this 1/8" carving drill are sharpened from the tip on up. That allows you to carve sideways with the tool. It's great for cleaning out or expanding tight areas. The tapered design draws the drill into the wood very quickly. The drill is...

10MM KNIFE-EDGE CUTTER

10MM KNIFE-EDGE CUTTER

2 1/2" BUFFING BRUSH ON 1/4" MANDREL

2 1/2" diameter Bristled Buffing Brush on 1/4" mandrel

2 1/2" BUFFING BRUSHES - PKG. OF 3

2 1/2" BUFFING BRUSHES - PKG. OF 3

3" MUSLIN COMBO BRUSH

3" MUSLIN COMBO BRUSH

3" MUSLIN COMBO BRUSH WITH 1/4" MANDREL

3" MUSLIN COMBO BRUSH WITH 1/4" MANDREL

3/32" SHANK ADAPTER FOR 1/16" BITS

You've acquired a bunch of those little 1" long x 1/16" shank dental burrs, now what are you going to do with them?  You don't have anything that will hold them.  Instead of getting an adapter for your micromotor handpiece that takes you down...

3/32" SHANK ADAPTER FOR 70-80 DRILLS

This is the adapter you need for using those itty-bitty, teeny-weeny #70 to #80 drill bits.

3/32" Shank Carving Drill

The flutes on this 3/32" carving drill are sharpened from the tip on up. That allows you to carve sideways with the tool. It's great for cleaning out or expanding tight areas. The tapered design draws the drill into the wood very quickly. The drill...